Linksys WUSB6300 Contents Product Overview Features 1 Installation Installation 2 Wireless Network Configuration Wi-Fi Protected Setup 3 Wireless network configuration utility 3 Operating system’s built-in wireless network setup 3 Troubleshooting WUSB6300 10 Specifications Linksys WUSB6300 11 i
Linksys WUSB6300 Product Overview Product Overview Thank you for choosing the Linksys dual-band wireless USB AC1200 adapter. Using the latest wireless networking technology, the adapter adds or upgrades wireless connectivity on your Windows-based desktop or laptop computer. To help protect your data and privacy, you can configure your home network and this adapter to use Wi-Fi Protected Access 2 (WPA2) encryption.
Linksys WUSB6300 Installation Installation This chapter describes the procedure for installing the adapter. Windows XP Installation a. Click Start, then click My Computer. To install the adapter: 1. Insert the CD into your CD or DVD drive. 2. For Windows 8, click Tap to choose what happens to this disc in the upper-right corner of the screen. 3. Click Set up your Linksys Adapter. If you do not see a pop-up menu for the CD, access Setup on the CD directly.
Linksys WUSB6300 Wi-Fi Protected Setup Wireless Network Configuration To configure the adapter’s wireless connection settings, you can use: •• Wi-Fi Protected Setup™ (if your router, gateway, or access point supports it) •• Your computer’s wireless network configuration utility •• Your operating system’s built-in wireless network setup Wi-Fi Protected Setup To connect using Wi-Fi Protected Setup: 1. Press the Wi-Fi Protected Setup button on your wireless router, gateway, or access point. 2.
Linksys WUSB6300 New Wireless Connection Operating system’s built-in wireless network setup New Wireless Connection To connect to a different wireless network: To connect to a different wireless network: 1. Move your mouse pointer to the lower-right corner of the screen, then click Settings. 1. Click the Wireless Network Configuration utility icon. A list of available wireless networks appears. 2. Click the wireless network icon .
Linksys WUSB6300 3. Enter the Wi-Fi Protected Access (WPA/WPA2) passphrase or the Wired Equivalent Privacy (WEP) key (depending on your type of security), then click OK. Operating system’s built-in wireless network setup Windows Vista After you have installed the adapter, the Wireless Network Configuration utility icon appears on your computer’s system tray. When your mouse pointer hovers over the icon, the status information of your wireless connection appears.
Linksys WUSB6300 3. Select your network, then click Connect. Operating system’s built-in wireless network setup 5. Enter the Wi-Fi Protected Access (WPA/WPA2) passphrase or the Wired Equivalent Privacy (WEP) key (depending on your type of security), then click Connect. 4. If your network uses wireless security, go to Step 5. If your network does not use wireless security, this screen appears. Click Connect Anyway and go to Step 6. This screen appears while the adapter connects to your network.
Linksys WUSB6300 This screen appears when you are connected to your network. Operating system’s built-in wireless network setup Note For help with the Wireless Network Configuration utility, click Start, then click Help and Support. Your computer is now connected to your wireless network. Windows XP After you have installed the adapter, the Windows XP Wireless Zero Configuration Utility icon appears on your computer’s system tray. 6. If you want to save your settings, select Save this network. 7.
Linksys WUSB6300 New Wireless Connection To connect to a new wireless network: 1. Right-click the Windows XP Wireless Zero Configuration icon in your computer’s system tray, then click View Available Wireless Networks. A window displays the available wireless networks. Operating system’s built-in wireless network setup 4. If your network uses Wired Equivalent Privacy (WEP) wireless security, enter the WEP Key in the Network key and Confirm network key fields.
Linksys WUSB6300 Operating system’s built-in wireless network setup Your wireless network will appear as Connected when your connection is active. Note For help with the Wireless Network Configuration utility, click Start, then click Help and Support. Your computer is now connected to your wireless network.
Linksys WUSB6300 Troubleshooting Troubleshooting WUSB6300 Your computer does not recognize the adapter. •• Make sure that the adapter is properly inserted into your computer’s USB port. •• Connect the adapter into a different USB port. Your computer cannot communicate with the other computers on your wireless network. •• Make sure that the computers are powered on.
Linksys WUSB6300 Specifications Specifications Linksys WUSB6300 Model Number WUSB6300 Standards 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac Interface USB 3.
Visit linksys.com/support for award-winning 24/7 technical support BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. © 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
Linksys WUSB6300 Regulatory Information
Linksys WUSB6300 Regulatory Information/ Conformité aux normes Safety Notices WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
Linksys WUSB6300 •• Reorient or relocate the receiving antenna. •• Increase the separation between the equipment and receiver. •• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •• Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Linksys WUSB6300 Regulatory Information/Conformité aux normes Déclaration de la FCC sur l’irradiation The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg. Cet équipement est conforme aux limites d’irradiation de la FCC définies pour un environnement non contrôlé. Les utilisateurs finaux doivent se tenir à 0.5 cm de distance du périphérique USB.
Linksys WUSB6300 Regulatory Information/Conformité aux normes •• Ministère de la Santé (Canada), Code de sécurité 6. Limites de l’exposition de l’organisme humain aux champs de radiofréquence électromagnétique dans la gamme de fréquences de 3 kHz à 300 GHz CE PÉRIPHÉRIQUE EST CONFORME AUX NORMES DE LA FCC ET D’INDUSTRIE CANADA RELATIVES À L’EXPOSITION AUX ONDES RADIO Votre adaptateur USB est un émetteur-récepteur radio.
Linksys WUSB6300 REMARQUE IMPORTANTE Déclaration sur l’irradiation : Cet équipement est conforme aux limites d’irradiation définies par Industrie Canada pour un environnement non contrôlé. Les utilisateurs finaux doivent se tenir à 0,5 cm de distance du périphérique USB. Veuillez consulter les renseignements sur le SAR pour toute information. Wireless Disclaimer The maximum performance for wireless is derived from IEEE Standard 802.11 specifications.
Linksys WUSB6300 WEEE Information User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Cisco home networking products.
Linksys WUSB6300 WEEE Information Deutsch (German) - Umweltinformation für Kunden innerhalb der Europäischen Union Ελληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf.
Linksys WUSB6300 WEEE Information Latviešu valoda (Latvian) - Ekoloģiska informācija klientiem Eiropas Savienības jurisdikcijā Magyar (Hungarian) - Környezetvédelmi információ az európai uniós vásárlók számára Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst izmest nešķirotā veidā kopā ar komunālajiem atkritumiem (tiem, ko rada vietēji iedzīvotāji un uzņēmumi).
Linksys WUSB6300 WEEE Information Polski (Polish) - Informacja dla klientów w Unii Europejskiej o przepisach dotyczących ochrony środowiska Slovenčina (Slovak) - Informácie o ochrane životného prostredia pre zákazníkov v Európskej únii Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt oznaczony symbolem znajdującym się na produkcie i/lub jego opakowaniu nie był wyrzucany razem z innymi niesortowanymi odpadami komunalnymi.
Linksys WUSB6300 WEEE Information Svenska (Swedish) - Miljöinformation för kunder i Europeiska unionen Det europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol på produkten och/eller förpackningen inte får kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt bör kastas efter att den avskiljts från vanligt hushållsavfall.
Linksys.com/support BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. © 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
