Owner's Manual

10
Chapter 4: Setting up and Connecting the Wireless-G USB Network Adapter with Wi-Fi Finder
Connecting the Adapter
Wireless-G USB Network Adapter with Wi-Fi Finder
3. Windows will begin copying the files onto your PC.
4. The Setup Wizard will now prompt you to connect the Adapter to your PC’s USB port. Once you’ve connected,
click Next.
5. If prompted by Windows, Windows 98SE and ME users will need to restart their PCs.
Connecting the Adapter
1. Insert the USB connector end of the Adapter into the USB port of the PC.
2. The Power LED should light up when the Adapter is plugged in.
Setting Up the Adapter
The next screen to appear will be the Available Wireless Network screen.
This screen provides two options for setting up the Adapter
• Available Wireless Network. (For most users.) Use this option if you have already set up a network and the
network is listed on the screen. Select the network and click the Connect button to connect to it. If you need
to update the Available Wireless Network list, click the Refresh button.
• Manual Setup. If your network is not listed on this screen, select Manual Setup to set up the Adapter
manually. This method of setting up the Adapter is intended for Advanced Users only.
The setup for each option is described, step by step, under the appropriate heading on the following pages.
Click Exit to close the Setup Wizard, if you wish to set up the Adapter later.
Figure 4-3: The Connecting the Adapter Screen
Figure 4-4: Available Wireless Network