USER GUIDE Wireless ADSL2+ Modem Router Model: X2000
About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. Copyright and Trademarks Linksys, Cisco and the Cisco Logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S.
Table of Contents Chapter 1: Product Overview 1 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Placement Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Overview Chapter 1 Chapter 1: Product Overview Thank you for choosing the Wireless ADSL2+ Modem Router. This device lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use it to share resources such as computers, printers and files. A variety of security features, such as WPA2™ security, a Stateful Packet Inspection (SPI) firewall and NAT technology, help to protect your data and your privacy while online.
Product Overview Chapter 1 Placement Positions Follow these instructions: There are two ways to physically install the device. The first way is to place the device horizontally on a surface. The second way is to mount the device on a wall. 1. Determine where you want to mount the device. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet.
Wireless Security Checklist Chapter 2 Chapter 2: Wireless Security Checklist Wireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over radio waves, it can be more vulnerable to intruders than a traditional wired network. Like signals from your cellular or cordless phones, signals from your wireless network can also be intercepted.
Advanced Configuration Chapter 3 Chapter 3: Advanced Configuration List of Screens in the Utility After you finish running the Setup Wizard on the Setup CD-ROM, the device is ready for use. To change the device’s advanced settings, access the Configuration Utility via a web browser on a computer connected to the device.
Advanced Configuration Chapter 3 Setup Tab Setup > Advanced Routing The Setup tab provides the device’s basic setup functions. The Advanced Routing screen allows you to configure the device’s advanced routing functions, such as operating mode, dynamic mode, and static routing. For detailed information on the Setup tab, refer to the Utility’s online help pages. Setup > Basic Setup The Basic Setup screen allows you to change the device’s general settings.
Chapter 3 Advanced Configuration Security > VPN Passthrough Applications & Gaming > DMZ The VPN Passthrough screen allows you to configure the device’s VPN passthrough feature. This feature lets VPN tunnels using the IPSec, L2TP, or PPTP protocols to pass through the device’s firewall. The DMZ screen allows you to expose one network user to the Internet for use of a special-purpose service such as Internet gaming or video conferencing.
Chapter 3 Advanced Configuration Administration > Diagnostics The Diagnostics screen allows you to perform a ping test to check the status of your Internet connection. Administration > Back Up & Restore The Back Up & Restore screen allows you to back up and restore the configuration settings of your device. Administration > Factory Defaults The Factory Defaults screen allows you to restore the factory defaults of the device.
Specifications Appendix B Appendix B: Specifications Operating Temp. 0 to 40°C (32 to 104°F) Storage Temp. -20 to 70°C (-4 to 158°F) Operating Humidity 10 to 85% Noncondensing X2000 Storage Humidity 5 to 90% Noncondensing Standards WLAN: 802.11n draft 2.0, 802.11g, 802.11b Ethernet: 802.3, 802.3u ADSL: T1.413i2, G.992.1 (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL2), G.992.
Appendix B Wireless ADSL2+ Modem Router Specifications 9
Troubleshooting Appendix A Appendix A: Troubleshooting Your computer cannot connect to the Internet. Follow the instructions until your computer can connect to the Internet: •• Make sure that the Modem Router is powered on. The Power LED should be green and not flashing. •• If the Power LED is flashing, then power off all of your network devices, including the Modem Router and computers. Then power on each device in the following order: •• 1. Modem Router 2.
Regulatory Information Appendix C Appendix C: Regulatory Information Íslenska [Icelandic]: Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC. European Union Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. Latviski [Latvian]: Šī iekārta atbilst Direktīvas 1999/5/ EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Regulatory Information Appendix C For all products, the Declaration of Conformity (DofC) is available through one or more of these options: •• A pdf file is included on the product’s CD. •• A print copy is included with the product. •• A pdf file is available on the product’s webpage. Visit www.linksysbycisco.com/international and select your country or region. Then select your product. If you need any other technical documentation, see the “Technical Documents on www.linksysbycisco.
Appendix C Regulatory Information 2,4 GHz richiede una “Autorizzazione Generale”. L’utilizzo all’aperto delle bande di frequenza 5150-5350 MHz e 5470-5725 MHz è soggetto ad autorizzazione generale. Consultare http://www.comunicazioni.it/it/ per maggiori dettagli. Third-Party Software or Firmware Latvia Technical Documents on www.linksysbycisco.com/international The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.
Appendix C User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Appendix C Regulatory Information Eesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele Français (French) - Informations environnementales pour les clients de l’Union européenne Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seadmeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest.
Appendix C Regulatory Information Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto.
Appendix C Regulatory Information Português (Portuguese) - Informação ambiental para clientes da União Europeia Slovenščina (Slovene) - Okoljske informacije za stranke v Evropski uniji A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares.
Regulatory Information Appendix C Australia Cisco-Linksys ADSL2+ Devices on Long Lines The following information applies if you use the product within Australia. ADSL2+ devices may not achieve the type of “high speed” operation expected when attached to a line that is longer than intended by the ITU-T Rec. G.996.1 ADSL standard i.e. >3 km of 0.4mm cable or a shorter cable length with several tails or multiples.
Regulatory Information Appendix C FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Regulatory Information Appendix C Canada The following information applies if you use the product within Canada. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
www.linksys.com/support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. © 2011 Cisco and/or its affiliates. All rights reserved.
