NC100 User Manual Product Model： NC100 Produet name： NC100 Company name: Shenzhen Shengyuan Tech Co.,Ltd.
Thank you for purchasing the Linner Active Noise-Cancelling Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number. Copyright©Shenzhen ShengyuanTech Co., Ltd Bluetooth® is a trademark of Bluetooth SIG, Inc. registered globally. 1. Package Contents A Bluetooth earphone Three Pairs of Ear Buds (S/M/L) Type-C Cable User manual 2.
Incident Operation Indicator status Power on When the headset is removed from the charging dock, the headset is turned on Red light 1 second, green light 1 second Pairing The unpaired earphones are taken out of the charging box and enter the pairing state; Take out two earphones from the charging box. If its not connected to the phone, its will enter the pairing state within 3s.
Earphone status VOL- VOL+ Music status Press the MFB button on the earphone-R for 3 seconds (hold it down),and then continue to reduce the volume. The volume will be reduced by 1 bar every 0.5 seconds. Press the MFB button on the earphone-L for 3 seconds (hold it down),and then continue to increase the volume. The volume will be increased by 1 bar every 0.5 seconds. 2.6.
Connection status Music status Voice assistant start Voice assistant start Voice assistant start Voice assistant start 3. Product Care & Use Please keep away from liquids and extreme heat. Do not use headphones at high volume for extended periods, as this may cause permanent hearing damage or loss. 4. Warranty &Customer Support For after-sales service and warranty issue，inform us of the order number and product number.
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
