PAGE LINO HOME DECOR PRODUCTS,INC.
PAGE LINO HOME DECOR PRODUCTS,INC. CQ’ PARTS IDENTIFICATION ITEM DESCRIPTION QTY #1 TOP 01 #2 LEFT SIDE 01 #3 RIGHT SIDE 01 #4 PRESS PANEL 01 #5 BOTTOM PANEL 01 #6 BACK PANEL 01 #7 DRAWER FRONT 01 #8 DRAWER LEFT SIDE 01 #9 DRAWER RIGHT SIDE 01 #10 DRAWER BACK 01 #11 DRAWER BOTTOM 01 #12 DRAWER BOTTOM RAIL For ease of identification all parts are labeled to correspond to the Step number in which the part is used.
PAGE LINO HOME DECOR PRODUCTS,INC. Wa” HARDWARE IDENTIFICATION Please line up the hardware with the correct full size image to make sure you are installing the hardware correctly. ITEM PICTURE DESCRIPTION | QTY fn (24) A Not to Scale LARGE BOLT 02 B £ Not to Scale | KNOB (@4x30mm) | go pew 24 Full Size D ga (@8x30mm) | woo power 16 Full Size (23.
PAGE LINO HOME DECOR PRODUCTS, INC. a’ STEP 1. knocking the wooden dowels tight by hammer SCREWDRIVER (NOT PROVIDED) STEP 2. Se > knocking the wooden dowels tight by hammer 5 ww (NOT PROVIDED) IMPORTANT: 1. DO NOT TIGHTEN BOLTS COMPLETELY UNTIL ALL BOLTS ARE COMPLETELY LINED UP AND INSERTED INTO HOLES / NUTS. 2. DO NOT OVER TIGHTEN SCREWS AND BOLTS TO AVOID STRIPPING.
