Manualshelf

User Manual

ManualsBrandsLINOVISION ManualsCamera & Photo4MP PoE PTZ Camera, 2.8-12mm Motorized 4X Optical Zoom Camera with Audio Interface, DarkFighter IR Network Speed Dome, 120db True WDR, US OEM Version with Upgradable Firmware
101102103104105106107108109110
Table Of Contents
User Manual of Network PTZ Camera
© Hikvision
96
Figure 6-48 RS-232 Settings
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
If you want to connect the camera through RS-232 port, the parameters of the RS-232 should
be exactly the same with the parameters you configured here.
3. Click to save the settings.
RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ
parameters should be done before you control the PTZ unit.
Steps:
1. Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS-485
Figure 6-49 RS-485 Settings
2. Set the RS-485 parameters and click to save the settings.
The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the
same as those of the control device.