3 Microphone 4 LED Indicator Light 5 Micro-USB Charging Port Micrófono Luz LED Indicadora Puerto de carga Micro-USB 6 Speaker Altavoz 7 Gel Ear-Tip Almohadilla protectora de gel 7 5 6 3 4
STEP 1 CHARGE HEADSET AURICULAR DE CARGA Plug Micro-USB into headset and USB into a compatible port (such as a wall charger, car charger, or computer). Light is RED while charging and LED light is off when fully charged. * Wall/Car charger not included Conecta el micro-USB a los auriculares y el USB en un puerto compatible (como un cargador de pared, un cargador de automóvil o una computadora). La luz es ROJA durante la carga y el LED está apagado cuando está completamente cargado.
STEP 2 PAIRING YOUR DEVICE EMPAREJAR SU DISPOSITIVO On the top of your Mono Wireless Headset, press and hold the Multi-Function button until you see the LED indicator flashing between RED and BLUE and hear “Power On.” In your devices Bluetooth settings look for “MONO-BLK” to appear as an option and select to complete pairing. When it is connected you will hear “Connected” play through your headset and the LED light will turn off.
STEP 3 START LISTENING EMPIECE A ESCUCHAR When you’re ready to use, press and hold the MultiFunction button for 2 seconds to turn your Mono Wireless Headset on. The Multi-Function button can also be used to play/ pause music, answer, end, decline, and re-dial phone calls, use voice assistant, and power off the headset. Use the volume button on the side of the headset to adjust volume and skip songs. *See how to use button controls on page 4 & 5.
ONE YEAR LIMITED WARRANTY Garantía limitada de un año, visite visit quikcell.com/warranty © 2021 All rights reserved. Alphacomm and Quikcell are registered trademarks of Alpha Comm Enterprises, LLC. All other trademarks are the property of their respective owners. Designed by Alpha Comm Enterprises, LLC at Diseñado por Alpha Comm Enterprises, LLC en 1500 Lakes Parkway, Lawrenceville, GA.30043. Mono Wireless Headset MONO-BLK FCC ID: 2AKZ8-LWS17 Alpha Comm Enterprises Inc.
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
