user’s manual Bluetooth® Headphones model #: PBH10 Bluetooth®/Wired Headphones
What’s Included Contents Unpack the Bluetooth® headphones and make sure all accessories are put aside so they will not be lost. hello. Micro USB Cable Audio Cord Thank you for purchasing the AT&T Bluetooth®/wired headphones [PBH10]. Bluetooth® Headphones Features • Bfluetooth 2.1+EDR technoflogy wfith amazfing sound • Built-in microphone with echo cancellation • Full controls for playback and calls • Portable folding design • 3.
Contents Safety Contents Information Introduction 2 What’s Included 3 Safety Information 5 6 2. WATER AND MOISTURE - The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 7 7 7 8 9 3. VENTILATION - The unit should be situated so that its location or position does not interfere with its proper ventilation.
Contents Getting Started Operational Contents Instructions Location of Main Unit Controls Charging Charge your PBH10 through any USB jack or wall charger. The LED indicator will begin to blink red when charging. Before using for the first time, charge at least 4 hours. After the first charge, the headset will charge in 2 to 3 hours and the LED indicator will stop blinking when the charge is complete. Note: When the battery is fully charged, the LED indicator will change to blue.
Contents Operational Instructions Operational Instructions Making Phone Calls Listening to Music Making a call Once paired, use your mobile device to dial a number as usual. Once connected, the call will be heard on your PBH10 headset. Play/Pause Press the Play button to launch the phone’s music player and to start listening to music. While listening to music, press the Pause button to pause or to resume play. Last number redial Press the ON/OFF button to redial last number.
Troubleshooting Compliance Contents with FCC Regulations Symptom Solution Music is not streaming over Bluetooth Check to make sure both devices are paired and connected over Bluetooth. Restart the PBH10 to auto-connect with your Bluetooth device. No power Make sure the PBH10 is fully charged. PBH10 does not answer phone calls Check to make sure both devices are paired and connected over Bluetooth. Restart the PBH10 to auto-connect with your Bluetooth device.
Warranty Information Warranty Information Limited Warranty Obtaining Service: To obtain service, product literature, supplies or accessories please call 1 888-920-8680, or visit our website, www.att.com/electronics, to create a ticket for exchange/repair. Please make sure to provide the date of purchase, model number and a brief description of the problem. Our customer service representative will contact you or send detailed return instructions. The AT&T brands are used under license.
Specifications Contents Memo - Bluetooth 4.0 - Bluetooth compatibility: Bluetooth 2.0 or above device with A2DP/AVRCP/HFP/HSP - Working distance: Up to 30 ft.* purchase date: place of purchase: * Up to 30 ft. wireless range as determined by Bluetooth SIG. Range may vary depending on the line of sight obstacles.
www.att.com/electronics ©2015 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue 2.0 AT&T 9/2015.
