User's Manual

Note: if you would like to connect the headphones to another device,you must unpair the
headphones from the currently paired device first.On your device’s bluetooth settings,select
“PBT89”,then select “unpair”.When the headphones have been unpaired,it automatically goes into
pairing mode again.
B. Using as wired headphones
Switch On the headphone.Connect the one end of the included 3.5mm Aux cable to the Aux In
jack on the headphones,and the other end of the cable to an external device’s headphone
jack(smartphone,tablet,computer,or MP3 player).Open a media player on your device and click on
play to start playing your music. Use the controls on your connected device to control music
playback and volume(Or you can use the volume control on the bluetooth headphone to control the
volume,and control music playback by using the controls on your connected device).
C.Charging the bluetooth headphones
Connect the small end of the Micro USB cable to the charging port on the headphones. Connect
the large end of the Micro USB cable to your computer’s USB port or an AC adaptor(not included).
The LED indicator light turns RED when charging.It will turn off when fully charged.
3.Features:
- DRIVER UNIT: 40MM
- BUILT-IN BLUETOOTH CHIPSET: JL-BT 2.1 STEREO
- PLAYING TIME: 12-14H
- STANDBY TIME: 18-20H
- BATTERY: 480MAH
- OPERATION RANGE: 10-12M
- FREQUENCY RANGE: 2.4GHZ-2.48GHZ
- BUILT-IN MIC
- AUX PORT
- VOLUME CONTROL/MUSIC
CONTROL/PLAY/PAUSE/ANSWER/HANG-UP