Product Warranty

11
2.4G REMOTE
Video
To Start Recording:
1. Verify the camera is in Video mode .
2. Press the Grey Video buon . The Camera will emit one beep and the Camera light will
flash while recording.
To Stop Recording:
• Press the Grey Video buon . The camera will emit one beep and the Camera Light
will stop flashing.
Photo
To Take a Photo:
1. Verify the camera is in Photo mode .
2. Press the Red Photo buon . The camera will emit a camera shuer sound.
Replacing the Remote Battery
The remote uses a 3 Volt Lithium cell type CR3032.
• You will need a small jeweler’s screwdriver with a Philips or + p.
• Your working area should be a flat surface like a table or desk so you do not lose the
screws.
To replace the baery in the remote control:
1. Remove the non-buckle end of the strap.
2. Flip the Remote over so you can see the back cover.