Specifications

72
Catalogue 2015 LintexBackCare and maintenance
Before using the board for the rst time:
1. Clean the board carefully using Lintex H2O or similar. Never use a soap solution!
2. Wait about 15 minutes for the board to dry completely.
Daily cleaning:
Wipe the board using a whiteboard eraser.
Cleaning when a non suitable pen has been used:
1. Clean the board carefully using Lintex H2O or similar. Never use a soap solution!
2. Wait about 15 minutes for the board to dry completely. The slightest amount of residual
moisture can leave the board in worse condition than before cleaning. Residual moisture on the
surface is not visible to the naked eye.
3. If the board is unusually dirty and stained, use Lintex cleaning set.
Note! Pens and markers intended for use on whiteboards vary in quality and function. If the
board is not performing as it should, try changing the brand of pen. If the pens prove to be the
problem, the eraser must also be replaced.
Only use pens and markers intended for white boards.
Wipe the board using Lintex Glass board eraser.
Clean the board regularly. Use normal water as cleaning detergents.
Never use a soap solution.
If the board is unusually dirty and stained window cleaner is usable. Remember to clean the
board with water afterwords
Care and maintenance of Glass Boards
Care and maintenance of writing boards