Datasheet

64 65
LintexPrice ListPrice List
Back
Back
2014 2014 Lintex
HD Projection Screen portable tripod
Article number Name Size w x h mm Weight
694150 Projection Screen, tripod 1500 x 1500 11 kg
694180 Projection Screen, tripod 1800 x 1800 13 kg
Projection Screens HD Wall/ceiling
Article number Name Size w x h mm
693160 Projection screen for wall and ceiling, 1:1 1600 x 1600
693180 Projection screen for wall and ceiling, 1:1 1800 x 1800
693203 Projection screen for wall and ceiling, 1:1 2030 x 2030
693244 Projection screen for wall and ceiling, 1:1 2440 x 2440
695200IR Projection scr. for wall/ceiling, switch/IR 1:1 2000 x 2000
695240IR Projection scr. for wall/ceiling, switch/IR 1:1 2400 x 2400
695300IR Projection scr. for wall/ceiling, switch/IR 1:1 3000 x 3000
Projection Screens Care and maintenance
HD projection screen enclosed in a steel casing. The casing can be mounted on a wall or
ceiling. Fittings are included. All of our screens are made from PVC-free, plastic coated weave.
The screens have a Gain Factor of 1,0 which gives a viewing angle of 180°. Manually operated
screens have a slow retract function by which the screen rolls up smoothly and silently (does
not apply to screen sizes above 2000mm). Motorized with switch and IR remote control.
A classic tripod screen, easy to erect. White casing, and screen with black edges and white
legs.
Before using the board for the first time:
1. Clean the board carefully using Lintex H2O or similar. Never use a soap solution!
2. Wait about 15 minutes for the board to dry completely.
Daily cleaning:
Wipe the board using a whiteboard eraser.
Cleaning when a non suitable pen has been used:
1. Clean the board carefully using Lintex H2O or similar. Never use a soap solution!
2. Wait about 15 minutes for the board to dry completely. The slightest amount of residual
moisture can leave the board in worse condition than before cleaning. Residual moisture on the
surface is not visible to the naked eye.
3. If the board is unusually dirty and stained, use Lintex cleaning set.
Note! Pens and markers intended for use on whiteboards vary in quality and function. If the
board is not performing as it should, try changing the brand of pen. If the pens prove to be the
problem, the eraser must also be replaced.
Only use pens and markers intended for white boards.
Wipe the board using Lintex Glass board eraser.
Clean the board regularly. Use normal water as cleaning detergents.
Never use a soap solution.
If the board is unusually dirty and stained window cleaner is usable. Remember to clean the
board with water afterwords.
Care and maintenance of Glass Boards
Care and maintenance of writing boards