User's Manual

RK-Wi.232FHSS-25-FCC Rapid Development Kit User’s Manual

9 FCC Statements of Compliance

9.1 Statement and Conditions of Modular Compliance

FCC NOTICE (FCC ID: Q7V-3F090008X)

This device complies with the rules set forth in Part 15 by the Federal

Communications Commission. Operation is subject to the following two conditions:

1) This device may not cause harmful interference

2) This device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications not expressly approved by Radiotronix, Inc. could

void the user’s authority to operate the equipment.

The FCC-Wi.232FHSS-25™ module is provided with an inheritable FCC Modular

Certification. This certification may be inherited in an end-user product, negating

the need for FCC part 15 intentional radiator testing on this module, provided that

the following guidelines are met:

1. An approved antenna must be directly coupled to the module’s RP-SMA

connector.

2. The module must not be modified in any way. Coupling of external circuitry

must not bypass the provided connectors.

3. End product must be externally labeled with “Contains FCC ID: Q7V-

3F090008X”

4. The end product’s user’s manual must contain an FCC statement equivalent

to that listed in section 9.2 of this manual.

5. The antenna used for this transceiver must not be co-located or operating in

conjunction with any other antenna or transmitter.

6. The integrator must not provide any information to the end-user on how to

install or remove the module from the end-product.

The integrator is required to perform unintentional radiator testing on the final

product per FCC sections 15.107 and 15.109.

FCC Pre-certified Wi.232FHSS

FCC ID: Q7V-3F090008X