Instruction Manual

If an external electrical source is utilized, a statement that the outdoor cooking gas appliance, when installed, must

be electrically grounded in accordance with local codes or, in the absence of local codes, with the National

Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22 1

This outdoor cooking gas appliance shall be used only outdoors and shall not be used in a building, garage or any

other enclosed area

A serial number and model number located on this appliance should be provided for services.

This outdoor cooking gas appliance is to be used with at least 21” from the back and sides of any combustible

surface. The grill should not be placed under or on top of any surface that will burn. Do not obstruct the flow

of combustion and ventilation air around the grill housing.

a. Instructions for electrical equipment, separately approved by a nationally recognized testing agency that is

required to be provided with instructions for use shall be included with the instructions required with an

outdoor cooking gas appliance. This can be in its original form of duplicated within the instructions provided

with the outdoor cooking gas appliance.

b. Electrical equipment provided with the outdoor cooking gas appliance shall have the following in the

instructions:

1 To protect against electric shock, do not immerse cord or plugs in water or other liquid

2 Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off

parts;

Constructed and marked in accordance with the Specifications for LP-Gas Cylinders of the U.S. Department of

Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for

Transportation of Dangerous Goods; and Commission, as applicable; and provided with a listed overfilling

prevention device, provided with a cylinder connection device compatible with the connection for outdoor

cooking appliances

Instructions, including illustrations, on the proper cylinder orientation to provide vapor

withdraw. The cylinder used must include a collar to protect the cylinder valve

(a) Do not store a spare LP-gas cylinder under or near this appliance;

(b) Never fill the cylinder beyond 80 percent full;

injury may occur

This appliance designed to use a CGA 791 Connection: “Place dust cap on cylinder valve outlet whenever the

cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the

cylinder valve. Other types of caps or plugs may result in leakage of propane.”

Proper selection of non-combustible or combustible materials for the built-in enclosure, as applicable

This appliance is only for installation in a built-in enclosure constructed of non-combustible materials.

(a) Keeping outdoor cooking gas appliance area clear and free from combustible materials, gasoline and

other flammable vapors and liquids

(b) Not obstructing the flow of combustion and ventilation air

(d) Visually checking burner flames including pilot burner flame if provided, with pictorial representations.

Certificate 252521-2405769

Project 2405769

Figure No.(75)