User's Manual

Quick Start
Figure 1 Figure 2
Quick Start
Model 2251
See the Owner's Manual for full details.
WARNING
DO NOT CHARGE THIS UNIT USING AN AC/DC ADAPTER WITH REGULAR
BATTERY INSTALLATION
AAA
AAA
AAA
AAA
The FRS/GMRS has a built in POWER SAVER feature for maximum battery
life. But when the FRS/GMRS is not being used, conserve battery power by
pressing the button to OFF. Remove the batteries if the unit will notPOWER
be used for a long period of time.
4. Reinstall the BATTERY COMPARTMENT COVER and return the BELT
2. Remove the BATTERY COMPARTMENT COVER from the BATTERY
COMPARTMENT. See Figure 3.
(batteries not included) following the polarities as shown in Figure 4.
3.
AAA
AAA
AAA
AAA
Adjusting Speaker Volume
Transmitting a Signal
While holding the button, speak into the unit using a normal tone
of voice.
TALK
Release the button when you have finished transmitting.TALK
Check the channel activity by pressing and holding the
button. You'll hear static if the channel is unoccupied. Don't
TRANSMIT if someone is talking on the channel. Press and hold the
button to TRANSMIT. The icon is displayed. Hold the unit
in a vertical position with the MICROPHONE 2 to 3 inches (5 to 7.5)
MONITOR
TALK
from the mouth.
1.
2.
3.
Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is ON
and not transmitting. When you receive a signal on the current
channel, the icon is displayed. (See “LCD Screen” for details.)
Press the button to increase the volume.UP
Press the button to decrease the volume.DN
The speaker volume level is indicated by the number of bars displayed
in the upper right corner of the LCD.
Turning the Unit ON
Turning the Power On/Off
Press and hold the button. The unit will “beep” and the LCD
Screen will turn blank.
POWER
Press and hold the button. The unit will “beep” and thePOWER LCD
Screen will display then the current channel.2r5
NOTE: In order for other people to receive your transmission, they must also be on
the same channel you are currently using. Refer to the section
for more information.
Modelo 2251
FIGURA 1 FIGURA 2
3.
1.
1.
2.
3.
Presione y mantenga presionado el botón . Se oirá un sonida
"bip" y la PANTALLA LCD mostrará y el canal actual.
POWER
Presione y mantenga presionado el botón . Se oirá un sonida
"bip" y la PANTALLA LCD quedará en blanco.
POWER
presionado el botón para TRANSMITIR. EL INDICADORMONITOR
Mientras mantiene presionado el botón hacia la unidad con
un tono normal de voz.
TALK
.TALK