User's Manual

Cordless Telephone Operation
Cordless Tel
9
Preparing for Use
Before you can use your cordless telephone, you must charge the HANDSET for 12 hours.
Failure to do so will require recharging of the BATTERY PACK more often.
1. Place the HANDSET on the BASE UNIT for 12 hours.
2. After 12 hours, remove the HANDSET from the BASE UNIT.
Before you can use your cordless telephone, you must charge the HANDSET for
12 hours. Failure to do so will require more frequent charging of the BATTERY PACK.
See page 27 for more information on the BATTERY PACK.
NOTE: Depending on the frequency of use, once the HANDSET is fully charged, it remains
functional for approximately 6 hours of continuous use and approximately 6 days
when the HANDSET is off the BASE UNIT in STANDBY mode.
Receiving Calls
1. When the phone rings, the LCD Screen will display
“RING.” If you have Caller ID, the LCD Screen will
display the Caller ID information after the first ring.
2. With the HANDSET on or off of the BASE UNIT,
press the button. “TALK” will be displayed and
the Call Timer starts to count. Start your conversation.
3. To end your conversation, either press the button
or place the HANDSET on the BASE UNIT. If you
place the HANDSET on the BASE UNIT CHARGE
CRADLE, you activate the AUTOMATIC STANDBY
feature.
Talk
Talk
NOTE: The Call Timer will start to count once you press the button.
Talk
IMPORTANT
Do not use this telephone within 20 ft. of a microwave oven
while it is working, as you may experience interference.
This is a normal occurrence with 5.8 GHz phones and
should not be interpreted as a defect in the product.
TALK
02 08
Call Timer Display
Minutes
Seconds
manual 5815 analog.qxd 3/16/2004 2:40 PM Page 16