User's Manual

Caller ID System Operation

Caller ID Sys

NOTE: To use the call back function, press the /Option button and then select the

10-DIGIT DIALING mode. Press button and the unit will automatically dial

the stored 7-digit number plus the area code.

E. Adjusting the Contrast

1. Press and hold the /Mute button to enter the menu.

2. Press the button to go to the CONTRAST programming option.

3. Press the /FLASH button to change the setting. “2” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle from the three levels of

contrast.

5. When the desired setting is displayed, press the /Save button to save the setting.

A double “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /Mute button to return to STANDBY

mode.

F. Setting the PBX Number

1. Press and hold the /Mute button to enter the menu.

2. Press the button to go to the PBX NUMBER programming option.

3. Press the /FLASH button to change the setting. “9” will begin flashing.

4. Press the SCROLL UP or DOWN button to customize the digit to match your

PBX system.

5. When the desired setting is displayed, press the /Save button to save the setting.

A double “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /Mute button to return to STANDBY

mode.

G. Setting the PBX Mode

1. Press and hold the /Mute button to enter the menu.

2. Press the button to go to the PBX NUMBER programming option.

jkl

mno

pqrs

Edit

Talk

Dir

manual 5815 analog.qxd 3/16/2004 2:40 PM Page 30