User's Manual

Caller ID System Operation

I. Deleting Message Waiting Indication

1. Press the /MENU button to enter the menu.

2. Press the button to go to the MESSAGE WAITING programming option.

3. Press the /FLASH button to reset the Message Waiting Indication. “Off” will begin

flashing.

4. Press and hold the /RE/PA button to delete the indication. A long “beep” will

sound to confirm the setting has been saved.

5. Continue with programming or press the /MENU button to return to STANDBY

mode.

J. Setting the Area Code

1. Press the /MENU button to enter the menu.

2. Press the button to go to the AREA CODE programming option.

3. Press the /FLASH button. The entry will display a flashing prompt at the left side

of the number field.

4. Press the TELEPHONE KEYPAD to buttons to enter the three digit area

code for your phone number.

5. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

NOTE:

To use the call back function, press the /OPTION button and then select the 10-DIGIT

DIALING mode. Press the button and the unit will automatically dial the stored

7-digit number plus the area code. The LCD Screen will only display the last 7-DIGITS for

all 10-DIGIT INCOMING CALLS that matched the AREA CODE setting.

TALK

EDIT

SAVE

wxyz

VOL

5860 man.qxd 11/7/2003 5:48 PM Page 35