User's Manual

BASE UNIT Controls
1. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
2. (MAILBOX 1) Button: Press to activate functions for MAILBOX 1.
3. (MAILBOX 2) Button: Press to activate functions for MAILBOX 2.
4. (MAILBOX 3) Button: Press to activate functions for MAILBOX 3.
5. (MAILBOX 4) Button: Press to activate functions for MAILBOX 4.
6. Button: Press to repeat messages.
7. Button: Press to set/check the day and time.
8. Button: Press to set the 3-digit Remote Access Code for remote operation.
9. Button: Press to erase messages.
10. Button: Press to set the day during time setting, or press to set the first digit of
the access code during code setting.
11. Button: Press to set the hour during time setting, or press to set the second
digit of the access code during code setting.
12. Button: Press to play messages.
13. MICROPHONE
14. RESET Button: Press to reset the system and clear all recordings.
15. TELEPHONE LINE CONNECTION JACK
16. POWER-IN CONNECTION JACK
17. MAILBOX LED Indicators: Lights to indicate the presence of message(s) and
blinks to indicate that the corresponding MAILBOX is active and ready to operate.
18. LED MESSAGE DISPLAY: Indicates the number of memos/messages received,
status of the system.
EAEA - Erasing 01 01 ~63 63 - No. of memos/messages OP OP - OGM is playing
AoAo - Announce Only FU FU - Memory is full
Channel Display - Shows the channel on which the telephone is locked.
19. Button: Press and hold down to record memo messages.
20. (OUTGOING MESSAGE) Button: Press and hold down to record OGM messages.
21. Button: Press to PAGE the HANDSET. Press again to stop.
22. BASE UNIT ANTENNA: Raise or reposition for the best reception.
23. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the
answer function is turned ON.