User's Manual

34
1 Brake sounds stop, throttle holds at speed step 1,
2 Enables one let-off sound,
3 Starts continuous warning bell sound. (Legacy
engines only)
4 Display says ROLL
Press direction a second time, underway,
1 Brakes engine to a quick stop with brake sounds
2 Enables a let-off sound upon stopping.
3 Stays in forward
Press direction a second time, during ROLL condition,
1 Stop engine
2 Trigger let-off sounds
3 Stop continuous warning bell sounds. (Legacy
engines only)
4
Dec 5 06 ny…removed pressing direction twice underway per John R as redundant
Press direction once while stopped
1 Reverse with let-off sounds.
Optional Legacy Direction Control in on Speed-Controlled Legacy
retrofitted Engines
*dec 2 06 ny added stall description to replace ROLL in non speed controlled engines
ote: Since non-speed controlled engines do not regulate exact speeds, it is
unreliable to expect a consistent ROLL condition at speed step one. This type of
engines requires that you set a STALL setting to replace ROLL.
STALL condition should be set just as your engine is about to stop moving.
Even with this setting, your engine behaviour may not be exact. This is a limitation
of any non-speed control engine. Experiment with the STALL setting to learn about
each engine’s behaviour and adjust it accordingly.
To set STALL
1 Press SET (headlight will flash)
2 Get your engine moving at it’s lowest consistent speed.
3 Press SET ( headlight will stop flashing, engine will
stop)
4 Your engines STALL setting has been set
Press direction once, underway