User's Manual
79
WORK AREA…HARD HAT REQUIRED
DIRECT COTROL OPTIOS
Direction
Choose Direction Control methods
VEL (Default) Velocity Throttle Direction Control
OFF Normal (one press) Direction Control only
DEF Return to Factory Default
Stall
SET Set stall by turning rotary and using graph while pressing
SET softkey
ReleaseSET soft-key to save
SPEED GRAPH OPTIOS
Speed graph
Choose “Look” of Speed Graph
SP1 (Default) Large graph, no name
SP2 Large numeric output instead of graph
SP3 Large graph with additional numeric readout
SP4 Big name with train-brake graph
DEF Return to Factory Default
ROUTE OPTIOS
SWITCH OPTIOS
ACCESSORY OPTIOS
SYSTEM OPTIOS
EGIE OPTIOS
Stall
Insert diagram 43.5 stall set sequence ( set button and graph) here
Introduction
“Stall” is used to establish the amount of power required as a
locomotive first starts moving. Once “stall” is set, it ignores any speed steps
below that threshold. Engines without speed control (Odyssey or Legacy
Speed Control) may benefit from a new “stall” setting.