User's Manual

9
TMCC Engines and Retrofit Engines
Custom Read/Write Memory Modules
Older TMCC engines have their Engine options entered manually. Here’s
how to save that info so you can take it with you to a new Legacy layout.
Once the info has been entered manually (see page XXX, Engine options),
address the engine, and insert a Read/Write memory module into Cab 2.
Follow the prompts to upload. Now you have saved the engine INFO into
the Memory Module.
TMCC engines do require a Read/Write memory module if you want to
take them to a new layout and would like to have the name and engine
options available to download into the new layout’s Legacy system base.
When you arrive at the new layout, pick up a CAB 2 and address your
older TMCC locomotive. Then insert the memory module into the Cab 2.
You have added all the INFO for that locomotive into the new layout’s
Legacy System.
Read/Write modules come with retrofit kits or are purchased separately.
Insert Diagram 3.7 (Insert Memory Module) here.
How to upload Engine Options to Memory modules
With your TMCC engine addressed, and Engine options manually
entered,
1 Address TMCC engine
2 Press INFO
3 Insert memory module into remote
4 Select “SAVE INFO”
When the information is uploaded (a few seconds, watch the Display
screen) you can remove the memory module from the CAB 2 and place it
in the optional TMCC 2 Legacy Roll-Top Memory Garage or another safe
place.
Diagram 3.8 of memory module inserting into CAB 2 here