User's Manual

50
RECORD
Use the Legacy <RECORD> button to record any action that you desire to
see repeated.
A complete recording always consists of a stored trigger command and an
action sequence. Once the action is recorded, playing back is simple.
The Trigger Command, which can be any combination of key presses, will
always playback that sequence automatically whenever it is entered.
Recording
Insert diagram 59.5 (Record button, LED) here
To create the stored trigger, press <record> briefly
1 The led blinks fast
2 In this state the user enters the trigger commands.
ie, <TR> <1>
3 The led goes out on the first key-press
To erase the stored trigger and try again, press <record> and hold it
down
1 The led blinks fast
Release the record button
1 The trigger is erased
2 The led stops blinking
To save the stored trigger, press <record> briefly
2 The led blinks slowly
To record the sequence of commands, once the trigger is saved and the
led is blinking slowly, the user enters the sequence to be recorded, ie,
<AUX 1> <7 >.
1 The led goes out on the first keypress
To erase the sequence of commands and try again, press <record> and
hold it down.
1 The led blinks slowly
Release the Record button
1 the sequence is erased
2 the led stops blinking
To save the recorded sequence, press <record> briefly
1 The led emits a steady light for 3 seconds,
confirming recording done