User's Manual

55
LEGACY VELOCITY THROTTLE
Rotating the Velocity throttle at different rates will result in control of effects as well
as fine to coarse control of train speed.
Velocity Throttle Speed
Velocity Throttle Speed Control with a Low momentum setting
1 Turning the rotary slowly takes 4 revolutions to go
from speed-step 1 to 200
2 Turning the rotary quickly takes less than 1
revolution to go from speed-step 1 to 200
Velocity Throttle Speed Control (with a Medium or High Momentum
setting) 1 The target line movement is the same as with the
“Low” setting
2 the grey-bar movement is affected and moves
slower than at the “Low” setting.
The Target line and Grey-bar
The Target line represents the desired speed of the train. The grey-bar represents
the commanded speed of the train. It is this difference that lets you control features like
the Auto-Brake independently of the speed of the train. Experiment with L M and H
momentum and see how it affects your train’s commanded speed compared to the Target
line.
Velocity Throttle Auto-Brake
Velocity Throttle Brake Control
Insert diagram 20 VT Brake (Target Line at speed step 1, grey bar at
50%) here
Move the target line to speed step 1 (Roll) while the grey bar is above
speed step 1
1 Trigger a brake sound during deceleration
2 Continue braking and sounds until speed step 1,
(ROLL condition) is attained.