User's Manual
58
MOMETUM
Momentum plays a big part in exploring the new features of the Velocity
Throttle and Legacy Sequence control.
Momentum settings govern the amount of time it takes your engine to
reach its Target Speed. During that time, a lot of events happen
automatically. Momentum, the rate of your engine’s acceleration, is set to
“M” or medium as a default. Setting Momentum to “L” will greatly
increase acceleration and deceleration rates, affecting the timing of some
“sequence control” features, while setting Momentum to “H” will decrease
the rates of acceleration and deceleration, giving you more time to
experience “sequence control” transition events.
Momentum has 3 settings, L is low or direct, M is user settable, and H is
high. Engines default to “M”. Experiment with “L”, “M”, and “H”.
You can easily “customize” each engine’s “M” momentum settings and
store these settings by using the method described next:
ote diagram incorrect
diagram 18 momentum select and graph
Press and Hold the M button
1 Display a momentum graph labeled “M”.
2 Continuing to hold the button down will enable you
to use your rotary to move the grey area of the
graph up or down to a new setting.
3 Release the “M” button.
4 Now you have re-set the momentum for “M”. Try it
out and adjust it until you like it. The new setting
will be saved automatically for whatever engine you
are using. Customize the momentum settings for
each of your engines this way.