User's Manual

2
T
he CAB-1L is the simple way to start operating in the LIONEL LEGACY Command Control
environment – and an economical way to add operators when running trains with friends!
Whether you want to access the basic features of the LEGACY control or operate our older TrainMaster
command control (TMCC1) equipment, the CAB-1L remote controller allows you to walk around
your layout while controlling your trains. The Base-1L receives signals from the remote and sends
your commands across the layout.
If you already have a LEGACY Base (6-14295), you can simply add one or more CAB-1L remotes
to your existing LEGACY layout—no need for the Base-1L. If you are looking to get started with
the LEGACY Control System, the combination of CAB-1L and Base-1L are an affordable way to start
unlocking many of Lionel’s celebrated features. Only one Base (either the LEGACY Base or the Base-
1L) should be used on a layout.
You may use a combination of LEGACY CAB-2 and CAB-1L remotes with a single LEGACY Base.
However, only CAB-1L’s may be used with the Base-1L.
Welcome to LEGACY command control