User's Manual

22
Train problem solving
Advanced operating techniques
I’m operating Train #7; one
“out of sync” engine fights
the others
Press TR
Press 7
AUX1
Press 0
Hear the horn/whistle blow
This resets the Train; do this whenever
you’ve finished Train building or when you
first begin running a lash-up. Still trouble?
Reassign the troublesome engine to the
lash-up by either using or not using the
DIR button. Do another Train reset and try
again.
Make sure you aren’t trying
to assign a mix of TMCC1 and
LEGACY locomotives to the same
train. That won’t work!
I’m operating a Train that
includes a number of
locomotives, but the circuit
breaker keeps tripping
It is possible to operate up to 16
powered and unpowered and unpowered
locomotives in a Train, if there is enough
power on the track. If the circuit breaker
keeps tripping, reduce the number of
powered locomotives on the track by
removing them from your Train.
Single-motored locomotives
usually draw less power than
dual-motored locomotives
Example
Example
Hint
Note!