User's Manual

TRAIN BEHAVIOR. TrainMaster Command lash-ups act like real-life ones. Press HORN;

only the lead unit’s horn blows. The same is true for BELL. The lead locomotive’s

headlight illuminates while the others remain dark. Hit DIR and lighting reverses to that

of the rear unit (equipped locomotives only). Press COUPLER F and the lash-up’s front

coupler will open; COUPLER R opens the lash-up’s back coupler.

PICK THE RIGHT NUMBER. The TR address button talks to remote controllable

transformers TRACKs as well as TRAINs. Choose TRAIN ID#s with numbers different from

your track power devices. lf you have remote controllable transformers assigned to TRACK

IDs 1 , 2, and 3, use TRAIN ID#s from 04 to 99 (remember that TMCC1 locomotives only

support TR addressed up to 9).

BE TIDY. Always clear a Train once you’ve seperated its locomitves by assigning each

member locomotive to Train #00. This restores engine functions that may have been

changed during train configuration.

Notes on Trains

Advanced operating techniques

Detail