User's Manual

15
Operating your train set
Silencing the steam chuffing sounds
T
o silence the background steam sounds, slide the CHUFF switch to the OFF position under the
frame. See Figure 8. Turn off track power for about two seconds, and then the background sound
will be silenced when the track power is restored. The whistle, announcement, and bell sounds can
still be triggered at any time using the remote. To restore the background sounds, simply slide the
CHUFF switch to the ON position and then turn off track power for two or more seconds.
Always turn off track power for about two seconds after you slide the switch. The
background sounds will be reset according to the new switch position when the
track power is switched on again.
Figure 8. Switch locations
Note!
REAR of
Locomotive
ONOFF
ON
OFF
CHUFF switch
Smoke ON/OFF switch
(See page 11)