Manualshelf

User's Manual

ManualsBrandsLionel ManualsElectronicsThomas and Friends Remote set
12345678910
8
Installing AAA batteries into the Remote Control
U
se a flathead screw driver to pry up the tab on the tab on the battery compartment hatch and
lift the hatch to open battery compartment (as shown in Figure 4). Insert three AAA batteries
orientating the +/- as shown in the bottom of the battery compartment. Replace the battery door
and snap closed.
Use only Alkaline ‘AAA’ batteries. Use only new batteries. Never mix new and used batteries or use
different types together.
REMOVE ALL BATTERIES WHEN THE TRAIN WILL NOT BE USED FOR AN
EXTENDED PERIOD OF TIME.
Important!
Powering your layout
Figure 4. Opening and closing the battery compartment