User's Manual
9
Running your train
Running your train set
With track power unplugged, place your train set on the track.
Refer to the following section for information on coupling the cars.
2
3
Plug in your wall-pack power supply and switch on the remote.
Your locomotive is designed to operate on 18 VDC. You may choose to operate
the train set using the wall-pack power supply, or you may run the locomotive on a layout
powered by virtually any Lionel and Lionel-compatible alternating-current transformer.
Yourlocomotiveiscompatiblewithwithdirect-current(DC)transformers.
Move ‘em out!
Use your remote to run your train. You can adjust the speed in forward or reverse,
blow the whistle, sound the bell, or trigger an announcement. Refer to page 12 for complete
details.
1
Note!