Setup & Op User guide

INTRODUCTION - LCR 600 INSTRUMENTS AND CONTROLS

Text Buttons

Navigation Buttons

Alphanumeric Keypad

The alphanumeric keypad serves as a navigation and data entry tool for the LCR 600. The four larger buttons on

the right side of the keypad are used primarily for navigating to elds on the display screen and navigating from one

display screen to the next. The ten smaller buttons on the left side are used to enter numbers, characters, and text

when changing the value of a eld.

Arrow Button to scroll the

pointer up the left side of

the display

Arrow Button to scroll the

pointer down the left side of

the display

LCR 600 Alphanumeric Keypad

Display Screens

LCR 600 display screens can contain up to 16 elds.

The values of most LCR 600 elds can be edited;

however, some elds are shown for data monitoring and

informational purposes only and can not be edited, for

example Temperature and Flow Rate.

SELECTING FIELDS

To select a eld for editing, the LCR 600 display screens

use a pointer that scrolls up and down along the left side

of the screen. If the eld is not editable, the pointer will

skip over it.



1. Move the pointer  on the far left of the display to the

desired eld using the  and  buttons.

2. Press the EntEr button to open a list box or a eld edit

box.

After a eld is selected, the LCR 600 will bring up a list

box or a eld edit box, depending on the eld, where the

value of the eld can be changed.