Setup & Op User guide
8
INTRODUCTION - LCR 600 INSTRUMENTS AND CONTROLS
FIELD EDIT WINDOWS
Some LCR 600 elds require a specic alphanumeric
entry. For these elds, the LCR 600 will open a small box
at the bottom of the screen where text, numbers, and
characters can be entered using the keypad.
1. Enter text, numbers, or characters using the multitap
functionality of the keypad’s 10 alphanumeric buttons.
2. Press the EntEr button to accept the value.
LIST BOX WINDOWS
Some LCR 600 elds only have a limited number of
possible values. These elds use list box windows to
display all of the possible values.
1. Move the pointer to your desired value using the
and buttons.
2. Press the EntEr button to accept the value.
List Box Window after selecting
Calibration Type eld
Calibration Screen
Pointer on the Calibration Type eld
Field Edit Window after selecting
Calibration Name eld
Calibration Type List Box
Calibration Name Field Edit Box
Press the PREV/ESC button to exit
any list box or eld edit window with changing its value
Throughout this manual, the type of edit box for
LCR 600 eld is included with the eld denition.
FE - Field Edit Box
LB - List Box