SDS

LN-3000 LIQUID NAILS FUZE IT MAX TAN
Product name
1
Product code
Date of issue
Version
00437451
16 March 2020
Section 15. Regulatory information
SARA 302/304
SARA 304 RQ
:
Not applicable.
Composition/information on ingredients
All components are listed or exempted.
United States inventory (TSCA 8b)
:
United States
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
California Prop. 65
No products were found.
SARA 311/312
Classification
:
ACUTE TOXICITY (inhalation) - Category 4
EYE IRRITATION - Category 2A
SKIN SENSITIZATION - Category 1
CARCINOGENICITY - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1
crystalline silica, respirable
powder (<10 microns)
≥50 - ≤75
CARCINOGENICITY - Category 1A
SPECIFIC TARGET ORGAN TOXICITY (REPEATED
EXPOSURE) (inhalation) - Category 1
amide wax
≥5.0 - ≤10
COMBUSTIBLE DUSTS
SKIN SENSITIZATION - Category 1B
trimethoxyvinylsilane
≥1.0 - ≤5.0
FLAMMABLE LIQUIDS - Category 2
ACUTE TOXICITY (inhalation) - Category 4
EYE IRRITATION - Category 2A
N-(3-(trimethoxysilyl)propyl)
ethylenediamine
≥0.10 - ≤2.6
ACUTE TOXICITY (inhalation) - Category 4
SERIOUS EYE DAMAGE - Category 1
SKIN SENSITIZATION - Category 1B
Name
%
Classification
Composition/information on ingredients
WARNING
: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Section 16. Other information
Hazardous Material Information System (U.S.A.)
0
1
0
National Fire Protection Association (U.S.A.)
Health
Instability
Flammability
Health
Flammability
Physical hazards
Date of previous issue
No previous validation
:
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
:
:
:
:
:
:
3
*
3
1
( * ) - Chronic effects
United States
Page: 12/13