SDS

PRODUCT DESCRIPTION

LIQUID NAILS

Heavy Duty Construction Adhesive, LN-901/LNP-901,

bridges gaps, provides 10 minutes working time and produces a

durable, ﬂexible, and impact-resistant bond on the heaviest materials.

With antioxidants added for superior all-weather performance.

RECOMMENDED FOR bonding common building materials

(concrete, lumber, etc.) to:

• Plywood and waferboard* • Treated lumber

• Drywall • Brick veneers

• Tileboard • Exterior foamboard

(when applied below 90ºF)

*See installation instructions or www.liquidnails.com

NOT RECOMMENDED FOR ﬂooring applications, ceramics, mirrors, granite,

marble (real or cultured), plastic, vinyl, ceiling tile, subﬂoors/underlayment, or 1/8"

medium density ﬁberboard paneling.

Please research all installation instructions and read entire label for safety, health

& environmental information prior to use.

Look for other LIQUID NAILS products which are right for your speciﬁc project.

PRODUCT ADVANTAGES

• Strong bond will outlast project • Waterproof & Weatherproof

• Bonds a wide range of construction materials • Interior & Exterior

• 100% Satisfaction Guaranteed • Strong, Durable and Flexible

• Exceptional holding power • Exceeds ASTM C-557

DANGER! EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED.

VAPORS MAY CAUSE FLASH FIRE.

Read Label and Material Safety Data Sheet Prior to Use.

See other cautions on last page. MDSF3-1100

LN-901/LNP-901

Interior & Exterior

HEAVY DUTY

CONSTRUCTION ADHESIVE

A premium, versatile adhesive that creates

a strong bond that will outlast your project.

PAGE 1
HEAVY DUTY CONSTRUCTION ADHESIVE LN-901/LNP-901 Interior & Exterior A premium, versatile adhesive that creates a strong bond that will outlast your project. PRODUCT DESCRIPTION LIQUID NAILS® Heavy Duty Construction Adhesive, LN-901/LNP-901, bridges gaps, provides 10 minutes working time and produces a durable, flexible, and impact-resistant bond on the heaviest materials. With antioxidants added for superior all-weather performance.
PAGE 2
HEAVY DUTY CONSTRUCTION ADHESIVE DIRECTIONS: Preparation: Surfaces must be clean, dry and structurally sound. 1. Cut nozzle at a 45° angle to desired size. 2. Puncture inner seal with nail or wire. Cabinets and counter tops: Apply a 1/4" bead to contact areas on the back of cabinets or counter tops. Press firmly into place. Mechanical fasteners must also be used for installing wall cabinets. Materials to furring strips or studs: Apply zigzag 1/4" bead to each strip or stud to be covered by panel.