Operating Instructions

Sensor 01

Startup

Print version 03/2021, English

5.3 Identification of the machine tool

To enable you to easily and securely identify the monitored machine tool, the sensor is

equipped with a removable, magnetic NFC token with integrated NFC (RFID). You can attach it

to any metallic magnetic surface. Mark the machine tool you want to monitor before connection

and startup.

Use the following procedure to mount the magnetic NFC token on the machine tool:

1. Detach the NFC token from the sensor.

Fig. 10: Detaching the NFC token from the sensor

2. Attach the NFC token on the machine tool you want to monitor. Attaching the NFC token

near the machine control is recommended.

 The machine tool is identified.

5.4 Information for the connection of the sensor

The sensor must be installed and started up near the coolant tank of the machine tool. Magnets

at the rear of the product are used to mount the sensor. This requires a magnetic surface. Direct

installation above the coolant tank is not mandatory, the hose lines are rather long. Ensure that

the instructions in the following chapters are observed.