Operating Instructions

Sensor 01

Startup

Print version 03/2021, English

5.5 Connection

Requirement:

 The machine tool was marked

 The information about the connection was read and understood

 1 copy of each warning and safety instruction is available

Use the following procedure to connect the sensor:

1. Remove the plugs (2) from the hose lines. To do this, press the metal coupling rings (1) in

the direction of the sensor while you are pulling out the plugs (2).

Fig. 11: Removing the plugs

2. Connect the power cable provided to the sensor. The connection is at the bottom.

 Connect the cable to the left connection. The right connector is an RS 485 port.

Fig. 12: Connecting the power cable