Operating Instructions

Sensor 01

Startup

Print version 03/2021, English

3. Connect the hose lines provided to the sensor. To do this, press the metal coupling rings

(1) in the direction of the sensor while you are inserting the hose lines (2) into the bushings.

Release the coupling ring.

 The coupling ring moves back to its initial position, thus locking the hose line.

 The left connection is for the hose line with pump. The right connection is for the outlet

hose

Fig. 13: Connecting the connecting lines

Fig. 14: hose lines connected

4. CAUTION! Danger of crushing from strong magnetic forces. The magnets of the

sensor are strong and are quickly pulled onto the metallic surface. Fingers can be

squeezed between the magnets and the metallic surface. Hold the sensor such that your

fingers are in the recessed grip.

5. Guide the rear of the sensor to a magnetic surface near the coolant tank. Attaching the

sensor above the coolant tank is recommended.

Fig. 15: Attaching the sensor on the surface