Operating Instructions

Sensor 01
Operation
28
Print version 03/2021, English
6 OPERATION
6.1 Introductory safety notes
Personnel qualification
The following personnel are approved for "operation":
 Trained, instructed operating personnel for using the sensor within the scope
of the intended use
Important information for your safety
You are responsible!
In any case, ensure that the safety instructions in chapter 2 "Basic safety
instructions" and the locally applicable safety regulations are observed and
complied with.
Wear the necessary personal protective equipment (PPE).
6.2 Switching on the sensor
Requirement:
 The sensor is connected
Use the following procedure to switch on the sensor:
1. Ensure that the sensor is connected as described in chapter "5.5 Connection" on page 24 .
2. Press the power switch on the back of the sensor to position "I".
 The status indicator on the front lights up.
 The background lighting is switched on.
 The sensor is switched on.
6.3 Switching off the sensor
Requirement:
 The sensor is switched on
Use the following procedure to switch off the sensor:
1. Press the power switch on the back of the sensor to position "O".
 The background lighting goes out.
 The status indicator on the front shines blue and goes out after a few seconds.
 The sensor is switched off.
6.4 Operation
The sensor is operated via the associated app (Liquidtool Manager). Use the procedure
described in the chapter "4.5 Downloading the app" on page 21 to download the app.
Further information about operation can be found in the app.