Specifications

Compatible with Qi-Enabled Devices
Charging your phone is now easier than ever. This dock
charges qi enabled devices wireless. Simply place your
phone on the charging pad the the LED indicator will light
up and your phone will begin charging by induction. Charge
your phone without ever having to look for a cable again!
Packing Contents:
1x wireless charging dock.
1x Micro USB Cable.
1x Manuel
How to Use:
1. Connect the charging dock to the supplied USB cable.
2. Connect the USB plug to USB power supply(support:5V/
2A)
3. When the red light appears. The dock has entered
standby mode.
4. Charging will begin when your device( Qi-Enabled) is
placed on the dock.
5. When the blue light is showing. The device is charging.
6. When the device is fully charged. The blue light turn off.
Specifications:
Input: 5V / 2A
Output Power: 5 Watts
Power Conversion: 70%
Working Frequency: 114.5-204kHz
Charging Distance: 2~7mm
Note: Power supply support 5V/2A
LED State:
Mode RED BLUE NOTE
Standby ON OFF
Charging OFF ON
FULL OFF OFF
ERROR FLASH FLASH (Check it,and Replace
again)
Warning:
1. Do not squeeze or collisions.
2. Do not disassemble or throw into fire or water,to avoid
causing a short circuit leakage.
3. Do not use wireless charger in severely hot,humid or
corrosive environments,to avoid circuit damage and occurs
leakage phenomenon.
4. Do not place too close with magnetic stripe or chip
card(ID card,bank cards,etc. ) to avoid magnetic failure.
5. Please keep the distance at least 20cm between
implantable medical devices(pacemakers,implantable
cochlear,etc.)and the wireless charger,to avoid potential
interference with the medical device.
6. To take care of children,to ensure that they won’t play
the wireless charger as a toy,to avoid unnecessary accidents.
MADE IN CHINA
V1.0