Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
TOMS TYRE PRESSURE/TEMPERATURE MONITORS SYSTEM (PATENT PENDING) INSTALLATION MANUAL 1. Specifications A. Pressure Sensor Pressure Range: 0 90 PSI Input Voltage: Temperature Measuring Range: -40°C to 125°C (SENSOR) Work Temperature: -40°C to 1257 Life: 7 YEARS Min Frequency: 433.92MHz, 315 MHz(OPTION) Speed B. Display Unit Input voltage: 9~16V Standby Current's Max Frequency: 433.92MHz, 315 MHz(OPTION} Work Temperature: -40°C to 85°C Display: temperature, pressure status indicator, Audio Alarm 2.
C. For Best Installation Results WHAT YOU NEED TO KNOW « The location of the most accessible mounting hole underneath vehicle you will be installing the antenna, RECOMMENDATIONS . & Be caution to prevent the valve core from shooting out of the stem, during deflating TYRE. » Be careful to avoid getting hands caught between the tire bead & wheel. ® Run-Flat tire sidewalls are very stiff and require safe tire iron prying techniques. » Use proper technique to avoid a back strain when lifting.
STEP: Insert lead fever avoiding contact with the Tx valve and pry top bead onto dismount head. STEPS: As required, briefly rotate counter clockwise to unfurl the toe of the bead on the dismount head. . STEPS: Carefully rotate clockwise to remove the upper bead. Remove drop center tools. STEPPE: Position lower bead opposite dismount head into drop center. Insert bead lever. STEP LL: Carefully rotate to dismount lower bead and remove tire from rim.
