User's Manual

Page 2
In normal setting, movement/nudge detection is enabled automatically when the
system arms. Warning beeps will sound if the motorcycle is nudged or moved, too
many beeps within a certain time will initiate a full reaction.
IGNITION CIRCUIT
If the circuit is
hotwired, or the
ignition is forced.
BATTERY CIRCUIT
If any part of the
circuit becomes live,
or the battery
connection is cut.
MOVEMENT
If the motorcycle is
moved or nudged
(with movement/
nudge detection on).
TAMPER
If there is any
attempt to gain
access to the alarm
control unit.
Four elements of the motorcycle are monitored and will initiate a full reaction if any
of the following occurs.
Movement/Nudge detection should be disarmed
when you are filling with petrol at a garage, or
moving the motorcycle with the ignition off.
NEVER LEAVE THE MOTORCYCLE UNATTENDED WHEN MOVEMENT/NUDGE
DETECTION IS DISABLED
MOVEMENT/NUDGE DETECTION
OPERATION OVERVIEW