User's Manual

Data Sheet: CR Series
JukeBlox Networked Media Modules
dat_CR860_CR870_2_14_datasheet.doc CONFIDENTIAL Version 2.14 – June 10
th
2010 - Page 10 of 15
Connectors
WLAN UFL Antenna Connector (optional)
One coaxial antenna connector is provided as an alternative to the built-in PIFA antenna. The choice
between using the PIFA antenna or using the coaxial socket is a build option, determined by the
position of a surface mount capacitor on the module PCB. Please see ordering guide for build option
details.
The surface-mount receptacle parts:
Hirose
U.FL-R-SMT (CL No. 331-0471-0)
Coaxial antenna connector dimensions
Module Connectors
The CR860/870 module uses 3 female board-to-board connectors as interfaces to the product main
board. The connectors needed on the product main board are male type, with the part numbers as
shown in the table below.
Connector
Number
Connector
Purpose
Connector
Type
Number
of Pins
Pin
Configuration
Male Mating Connector Part
Numbers
J1 LCD 30 2 x 15 x 0.5mm 14-5046-030-145-829+ (Kyocera)
J2 Media 120 2 x 60 x 0.5mm 14-5046-120-145-829+ (Kyocera)
J3 DAB
B2B
Connector
40 2 x 20 x 0.5mm 14-5046-040-145-829+ (Kyocera)