User's Manual

Data Sheet: CR Series
JukeBlox Networked Media Modules
dat_CR860_CR870_2_14_datasheet.doc CONFIDENTIAL Version 2.14 – June 10
th
2010 - Page 8 of 15
Board Dimensions
Top View and Side View
Bottom View (showing connector locations)
Note:
1. All dimensions are measured in millimetres (mm).
2. PCB’s thickness: 1.00 +/- 0.10mm
3. Tolerance: +/-0.10mm
4. Outline Tolerance: +/-0.10mm
5. NPTH Hole: +/-0.05mm
6. PTH Hole: +/-0.075mm
7. Connector positions, board dimensions, mounting
hole positions and sizes are the same for all module
variants.