User's Manual

Data Sheet: CR Series
JukeBlox Networked Media Modules
dat_CR860_CR870_3_5_datasheet_b.doc CONFIDENTIAL Version 3.5 – May 15
th
2011 - Page 13 of 26
7. Board Dimensions and Weight
Note: For mechanical details of versions CR870-2C Mfg200 and CR870-2Q, please see the appropriate addendum:
dat_CR860_CR870_3_3_datasheet_addendum_2C_Mfg200a.pdf or dat_CR860_CR870_3_5_datasheet_addendum_2Q.pdf.
These addendums are available upon request from BridgeCo.
7.1 Top View and Side View of CR870 modules with PIFA antenna & no
shields
7.2 Bottom View of CR870 modules with no bottom shield
Note:
1. All dimensions are measured in millimetres (mm).
2. PCB’s thickness: 1.00 +/- 0.10mm
3. Tolerance: +/-0.10mm
4. Outline Tolerance: +/-0.10mm
5. NPTH Hole: +/-0.05mm
6. PTH Hole: +/-0.075mm
7. Connector positions, board dimensions, mounting
hole positions and sizes are the same for all module
variants.
8. Connector position tolerance: +/- 0.38mm
Drawings shown:
 With PIFA antenna
 No top shield
 No bottom shield
RF section shield is
always present in CR870
modules.
Drawing shown:
 With connector locations
 No bottom shield