User's Manual

Data Sheet: CR Series
JukeBlox Networked Media Modules
dat_CR860_CR870_3_5_datasheet_b.doc CONFIDENTIAL Version 3.5 – May 15
th
2011 - Page 15 of 26
7.5 Module weight
CR860: 25g
CR870: 25g
Note: Module weight applies to all versions of the module.
8. Connectors and Connections
8.1 WLAN UFL Antenna Connector (optional)
One coaxial antenna connector is provided as an alternative to the built-in PIFA antenna. The choice
between using the PIFA antenna or using the coaxial socket is a build option, determined by the
position of a surface mount capacitor on the module PCB. Please see ordering guide for build option
details.
The surface-mount receptacle parts:
Hirose
U.FL-R-SMT (CL No. 331-0471-0)
8.1.1 Coaxial antenna connector dimensions
8.2 Module Connectors
The CR860/870 module uses 3 female board-to-board connectors as interfaces to the product main
board. The connectors needed on the product main board are male type, with the part numbers as
shown in the table below.
Connector
Number
Connector
Purpose
Connector
Type
Number
of Pins
Pin
Configuration
Male Mating Connector Part
Numbers
J1 LCD 30 2 x 15 x 0.5mm 14-5046-030-145-829+ (Kyocera)
J2 Media
B2B
Connector
120 2 x 60 x 0.5mm 14-5046-120-145-829+ (Kyocera)