User Manual

JukeBlox Networked Media Modules – CX Series
Datasheet
SMSC CX Module 36 Revision 2.8 (09-30-12)
SMSC CONFIDENTIAL
Revision Date / Author Details of Change Reason for Change
Updated Section 4.1 Part Number Syntax with
removal of Antenna Configuration number and
Note
Revert to original part numbering scheme.
Updated Section 10 Revision Control with new
Reason for Change column
Corporate standard.
Change from BridgeCo logos and disclaimer
text to SMSC logos and disclaimer text
Corporate standard.
Updated location of red boxes in Section 3.2.1
CX870 Bottom View with 64-pin Low density
connector
Improve alignment of red box to photo.
Updated location of red boxes in Section 3.2.2
CX870 Bottom View with 120-pin Media
connector
Improve alignment of red box to photo.
Moved Section 5.3 WiFi Specification on to one
page
Improve readability.
Updated Customer Portal information in Section
6 Regulatory Compliance and Quality
Easier to access URL directly.
Reverted Antenna Considerations back to
Section 6.0.1; subsequently all subsections in
Section 6 reverted back to original numbering
Decided to keep original part numbering
scheme to avoid unnecessary paper work and
the need to redo certifications.
Updated Notes 11 & 12 in Section 8.2.1 Pin
Descriptions with updated Customer Portal
information
Easier to access URL directly.
V2.0
(092611)
Sept. 26,
2011 / SHs
Updated Table of Contents Keep TOC aligned with actual content.
Updated font styling of Table of Contents Easier to read.
Update Section 2 Block Diagram : moved
RJ45+Transformer & USB Type A boxes inside
the drawing boundary
Improve accuracy of drawing.
Updated Section 5.3 WiFi Specification (CX870
only) TX Power Description entry
Align data with test limits.
Updated Section 5.3 WiFi Specification (CX870
only) Rx Sensitivity Description entry
Align data with test limits.
Updated Section 5.3 WiFi Specification (CX870
only) : add a Note underneath the table
Clarification of the possible effect of changing
the TX Power setting.
Updated Section 4 Ordering Guide : changed
CX870-3D row Two Ant entry from (X)* to X
Change to match final CX870-3D configuration.
V2.0 c Sept. 14,
2011 / SHs
Updated Section 4 Ordering Guide : removed
the two blank rows
Improve readability.