User's Manual
Table Of Contents
- FCC Compliance Statement
- What’s in the Box
- Getting Started
- Remote Control
- Picture Frame
- Initial Frame Setup
- Description of Main Menu
- Viewing Photos
- Configuring Access to Online Content
- Streaming Media from your PC to your HP Smart Wi-Fi Display
- Connecting your HP Smart-WiFi Display to your Computer with the USB Cable
- Using Headphones or Speakers with your HP Smart Wi-Fi Display
- Resetting the Frame
- Cleaning and Care Tips
- Feedback
- Getting Help
- Specifications
- Frequently Asked Questions
- Troubleshooting
11
Single Display
By default, the HP Smart Wi-Fi Display will show photos in Single display mode,
meaning that the slide show will display one photo at a time. If you have changed
to Quadrant display and would now like to return to viewing one photo at a time,
then you can return to Single display.
There are two ways to enable Single display:
1. From the Setup menu, choose Local Settings, then change Slideshow
Mode to Single. For more information, see “Local Settings” on page 18.
2. During slide show playback, press the Options button on the remote, and
change Slideshow Mode to Single.
3. Press the Back button to return to the slide show.
Standby
To stop the current frame function and turn off the display, simply press the
Standby button. To turn off the HP Smart Wi-Fi Display completely, you must use
the power switch on the back of the display.