User's Manual

15
Note: Alternatively, you can configure your HP Smart Wi-Fi Display using
Windows Connect Now (WCN) technology. To do so, run the Wireless
Network Configuration Wizard on your computer and insert the WCN
USB flash disk into the HP Smart Wi-Fi Display once the wizard is complete. For
more information on running the Wireless Network Configuration
Wizard on your computer, see “Running the Wireless Network Configuration
Wizard on your Computer (optional)” on page 16.
6. If required, enter security details, such as the password, using the remote control
to move through the letters on the virtual keyboard. If required, use the Mark
button to cycle through the virtual keyboards. This step is not necessary if the
wireless network does not have security.
Note: You can exit Network Setup by pressing the Home button. Your HP
Smart Wi-Fi Display will still work, but you will not have network/Internet access
until you go through Network Setup again.
7. When finished, press the Play/Pause button to enter the password.
8. You will now see a screen with information required to complete the setup
process online. This information includes the website address you should visit
from your computer, your Device ID and your Authorization Code. Keep a
note of these details, as you will need them to set up your www.hpframe.com
account. For more information on the online setup process, see “Setting Up your
www.hpframe.com Account” on page 24.
Note: The authorization code changes over time, or if you go through the
Setup Wizard again. The current code can always be found by going to
Setup > System Information.