User manual 802.11ac, 2T2R Wireless LAN USB2.0 Module WN4505L Version 1.2 Author: Kaysa Lee Editor: Kaysa Lee Change History Revision Version 1.0 Version 1.1 Version 1.2 Date 2013/03/04 2013/12/06 2014/04/22 Author Kaysa Lee Kaysa Lee Kaysa Lee Change List Preliminary Update Pin definition for WOW function Update Power Consumption * This document contains confidential proprietary information and is property of LTC.
CONTENT PRODUCT FEATURES .................................................................................................................... 4 PRODUCT SPECIFICATIONS ........................................................................................................ 5 MAIN CHIPSET ....................................................................................................................................... 5 FUNCTIONAL SPECIFICATIONS .............................................................
PRODUCT FEATURES Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac The WN4505L is developed using single-chip designed by Realtek Technology Corporation USB 2.
PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface Universal Serial Bus (USB2.0) Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz Media Access Control CSMA/CA with ACK 802.11b: CCK, DQPSK, DBPSK 802.11g: Modulation Techniques 64QAM, 16QAM, QPSK, BPSK 802.
14dBm@MCS5 13dBm@MCS6 13dBm@MCS7 13dBm@MCS9 802.11g mode (54Mbps) < -25dB HT20 (MCS7) < -28dB EVM HT40(MCS7) < -28dB HT80(MCS9) < -32dB 802.11b at 11 MHz Offset-30dBr 802.11b at 22 MHz Offset-50dBr 802.11a/g at 9 MHz Offset0 dBr 802.11a/g at 11 MHz Offset -20 dBr 802.11a/g at 20 MHz Offset-28 dBr Transmit Spectrum 802.11a/g at 30 MHz Offset-40 dBr flatness/Mask 802.11n at 9 MHz offset0 dBr 802.11n at 11 MHz offset-20 dBr 802.11n at 20 MHz offset-28 dBr 802.11n at 30 MHz offset-45 dBr 802.
CONNECTOR SPEC (CONNECTOR 1.25MM 1*5P 50271-0050N-001 SMD(宏致)) PIN ASSIGNMENT PIN.
BLOCK DIAGRAM EEPROM INFORMATION World Wide_13 Reg Domain 0x7F Vendor ID 0x0BDA Product ID 0x881A ENVIRONMENTAL Operating Operating Temperature: 0 to 75 C (32 to 167 F) Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 C (-40 to 185 F) Relevant Humidity: 5-95% (non-condensing) WN4505L Specification Page 8/8 LTC Network Access Confidential 2014/4/22
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC rules.
1. To comply with IC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with IC multitransmitter product transmitter product procedures. 2. Only those antennas with same type and lesser gain filed under this IC ID number c an be used with this device. 3.
